The technology of laser cutting machine

Laser cutting technology uses laser beam to the plate surface, the energy released to the stainless steel melting and
evaporation. General use of carbon dioxide laser beam, the working power of 500 to 2500 watts. The power level than
the required number of home heating power consumption is lower, however, through the lens and mirrors, the laser
beam gathered in a small area. High concentration of energy for rapid local heating to make stainless steel evaporator.
In addition, the energy of the laser cutting machine is very concentrated, so only a small amount of heat spread to
other parts of the steel, the deformation caused by little or no deformation. Laser cutting machine can cut complex
shapes very accurately the stock, the stock no longer cut for further processing.
Laser cutter machine can cut stainless steel 4mm below, adding oxygen in the laser beam can be cut 8 ~ 10mm thick
stainless steel, but the added oxygen in the cut surface after cutting
The formation of a thin oxide film. The maximum cutting thickness can be increased to 16mm, but the cutting part of
the larger size of the error.
Laser cutting machine price is quite expensive, about 150 dollars. However, follow-up process due to lower processing
costs, so in large-scale production equipment used in this
Is feasible. Since there is no tooling cost, so the laser cutting equipment is also applicable to the original production of
small quantities of various sizes can not be processed parts. Currently, laser cut
Computerized cutting equipment, digital control technology commonly used (CNC) device used in the device, you can
use the telephone cord from the computer-aided design (CAD) workstation to accept
Cutting data.