CNC router machine and repair knowledge

First, the mechanical parts repair maintenancecnc router:

1, once a week vacuum machine dust and dirt, all the electrical cabinet should Guan Yan dust.

2, the guide should always clean up and remove dust and other debris to ensure the equipment rack to the normal regular cleaning, add lubricant to ensure that no debris lubrication.

3, regular checks of steel, must ensure that tension.

4, every six months to check the track and the straightness of the verticality of the machine and found that abnormal timely maintenance of debugging.

Two, gas main tenance cnc router repair parts

1, gas system maintenance (1) regular checks of gas systems and found that normal use should not leak and the parts should be disposed in time, to ensure smooth flow of gas. (2) should be kept clean gas dust removal and debris to prevent premature aging gas.

2, pressure reducer valve adjustment maintenance will be required to gauge the pressure, regulating the process of stress should be made from small to big, to ensure that the pressure reducer to adjust continuously. Can not continuous such as conditioning or gas leaking from the safety valve on the pressure reducer must be replaced with new ones. Gas pressure reducer installed on their own folding of parts and components, will result in equipment damage, or even a serious personal injury.

3, cutting torch cutting tip tempered to prevent the device repair (1) cutting torch using the professional manufacturers of machine cutting torch, cutting torch long-term use, sealing surface damage, with the cutting tip we must use special tools to repair. (2) cutting torch using the professional standards of manufacturers Express cut mouth, cut the new mouth, were subject to censorship before they can be used. (3) cut the mouth of the required pollution clean-up a dedicated instrument preheat flame hole and cutting oxygen channel.

4, tempering is to prevent the important components to ensure safety, in accordance with the requirements of the security sector, tempered to prevent the demolition of unauthorized devices is strictly prohibited. Therefore, the tempering to cnc routerprevent use after a long timeto ensure that gas can not flow or leak when requested, must please to replace professionals.

Equipment operators must go through professional training of qualified only after the induction. Strictly non-professional staff to operate the machines